Send Message
Home ProductsDecoiler Straightener Feeder

CE Stamping Decoiler Straightener Feeder Equipment Stainless Steel Coil Processing

CE Stamping Decoiler Straightener Feeder Equipment Stainless Steel Coil Processing

  • CE Stamping Decoiler Straightener Feeder Equipment Stainless Steel Coil Processing
  • CE Stamping Decoiler Straightener Feeder Equipment Stainless Steel Coil Processing
  • CE Stamping Decoiler Straightener Feeder Equipment Stainless Steel Coil Processing
  • CE Stamping Decoiler Straightener Feeder Equipment Stainless Steel Coil Processing
CE Stamping Decoiler Straightener Feeder Equipment Stainless Steel Coil Processing
Product Details:
Place of Origin: Guangdong, China (Mainland)
Brand Name: RUIHUI
Certification: CE, ISO certification
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Packaging Details: Wooden Box or Vacuum Packing
Delivery Time: 30 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 30 Sets Per Month
Contact Now
Detailed Product Description
Stock Width(mm): 50~600 Stock Thickness(mm): 0.2~3.2
Line Speed(m/min): 16~24 Coil Weight(Kg): 3000/5000
Work Roll Number(Pcs): Upper 6/lower 5 Main Motor(Kw): AC 4.5
Warranty Period: 12 Months
High Light:

coil feeder straightener

,

coil handling equipment

 

 

Material frame, stainless steel coil processing, Guangdong stamping feeder equipment

 

Heavy-duty material racks are the most widely used vertical discharge unwinding equipment in the stamping industry. Before its appearance, there was a wide range of conventional racks used in the market.

Its structure is very simple, which consists of an iron bar that traverses the coil and two brackets that support the ends of the iron rod. This simple discharging method can also achieve the purpose of discharging and unwinding.

 

It is only complicated in refueling, complicated in adjustment (complex in the level of material belt adjustment) and extremely prone to material migration and bulk material, which is gradually replaced by heavy material frame.

 

The heavy-duty material racks are equipped with an L-shaped sensor rod (the material width is a separate floor-standing sensor frame, which works in the same principle). It is insulated by the material frame body and connected by an intermediate relay in the electric control box.

 

The 12V inductive power is supplied by the transformer in the electric box. When the heavy material rack is actually used, the material rack is continuously unwound so that the unrolled sheet forms a downward sag in the waiting area.

 

When the arc sag to a certain extent, it is in contact with the sensing rod (frame), and the circuit of the intermediate relay is turned on due to the induced voltage on the material.

 

When the control time relay cuts off the material frame motor switch after a delay, the motor stops and the material frame stops unwinding.

 

When the subsequent leveling machine continues to work, the arc of the material to be fed rises away from the sensing rod (rack), and the circuit of the intermediate relay jumps. After the time relay delays the jump, the material frame motor circuit is re-connected, and the machine will continue. Run, so as to achieve loop automation control.

leveling machine

leveling machine

Specification:
 

Model MAC2-400 MAC2-500 MAC2-600 MAC2-800
Stock Width(mm) 50-400 50-500 50-600 50-800
Stock Thickness(mm) 0.3~3.2 0.3-3.2 0.3-3.2 -3.2
Max.Coil Weight(kg) 3000 3000 3000 5000 5000 7000
Max.Coil O.D.(mm) 1200 1200 1200  
Coil I.D.(mm) 8 8 508 508
Feed Length(mm) ~500* ~500* ~500* ~500*
Max. Line Speed(m/min) 16-24 16-24 16-24 16-24
Work Roll Number(pieces) upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
Feed Roll Number(set) 1 1 1 1
Main Motor(kw) AC2.9 AC2.9 AC4.4 AC4.4
Mandrel Expansion hydraulic hydraulic hydraulic hydraulic
Reel Motor(kw) 1.5 1.5 1.5 2.2 2.2 3.7
Power(V) 3 Phase 220V/380V/50HZ
Operating Air(Mpa) 0.49 0.49 0.49 0.49


Straigtening performance:
 

tock Thicknees (mm) Stock Width (mm)
0.3 400 500 600 800
0.4
0.6
0.8
1.0
1.2
1.4
1.6 470 470
1.8 400 400
2.0 360 360
2.3 300 300 300 300
2.5 230 230 230 230
2.8 150 150 150 150
3.2 110 110 110 110


*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
CE Stamping Decoiler Straightener Feeder Equipment Stainless Steel Coil Processing 2
CE Stamping Decoiler Straightener Feeder Equipment Stainless Steel Coil Processing 3

1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.

Contact Details
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.

Contact Person: Calin Deng

Tel: 13826917409

Fax: 86-769-89296723

Send your inquiry directly to us
Best Products
Other Products